ce. The Mini M.E. can help save on energy costs by being wired directly to the machine tool control, operating only when the machine tool does. It also helps to reduce maintenance costs by protecting equipment from oil mist.

This quality unit not only traps and removes the oil mist, but also the smoke associated with cutting tools and grinders.

Trion, a division of Fedders Corporation, has developed an innovative mist collector called the Mini Mist Eliminator (Mini M.E.). Virtually all screw machines, CNC machines, surface and centerless grinders use water-soluble, synthetic and petroleum coolants to protect cutting tools and parts. The mists associated with these coolants can be harmful to the health of the machine operator through inhalation and contact with the skin and eyes. Based on potential health risks, the National Institute for Occupational Safety and Health (NIOSH) has established recommended exposure limits for oil mist.

The Mini M.E. removes oil mist from the air by utilizing the principle of electrostatic precipitation. This principle involves drawing the oil mist through an impinger which removes a majority of the mist, especially large droplets. The remaining mist is drawn through an ionizing section, charging the remaining mist particles which then pass through oppositely charged collector plates. The charged mist particles are attracted to the collector plates like a magnet. These particles then drip back down to be recaptured or drained away. The dirty collector plates can be simply washed clean, eliminating costly filter replacements.

The Mini M.E. also eliminates the need for extensive duct work because it can be easily mounted on the machine, platform or ceiling. This also helps to free up floor space. The Mini M.E. can help save on energy costs by being wired directly to the machine tool control, operating only when the machine tool does. It also helps to reduce maintenance costs by protecting equipment from oil mist.

This quality unit not only traps and removes the oil mist, but also the smoke associated with cutting tools and grinders.

he health of the machine operator through inhalation and contact with the skin and eyes. Based on potential health risks, the National Institute for Occupational Safety and Health (NIOSH) has established recommended exposure limits for oil mist.

The Mini M.E. removes oil mist from the air by utilizing the principle of electrostatic precipitation. This principle involves drawing the oil mist through an impinger which removes a majority of the mist, especially large droplets. The remaining mist is drawn through an ionizing section, charging the remaining mist particles which then pass through oppositely charged collector plates. The charged mist particles are attracted to the collector plates like a magnet. These particles then drip back down to be recaptured or drained away. The dirty collector plates can be simply washed clean, eliminating costly filter replacements.

The Mini M.E. also eliminates the need for extensive duct work because it can be easily mounted on the machine, platform or ceiling. This also helps to free up floor space. The Mini M.E. can help save on energy costs by being wired directly to the machine tool control, operating only when the machine tool does. It also helps to reduce maintenance costs by protecting equipment from oil mist.

This quality unit not only traps and removes the oil mist, but also the smoke associated with cutting tools and grinders.

This principle involves drawing the oil mist through an impinger which removes a majority of the mist, especially large droplets. The remaining mist is drawn through an ionizing section, charging the remaining mist particles which then pass through oppositely charged collector plates. The charged mist particles are attracted to the collector plates like a magnet. These particles then drip back down to be recaptured or drained away. The dirty collector plates can be simply washed clean, eliminating costly filter replacements.

The Mini M.E. also eliminates the need for extensive duct work because it can be easily mounted on the machine, platform or ceiling. This also helps to free up floor space. The Mini M.E. can help save on energy costs by being wired directly to the machine tool control, operating only when the machine tool does. It also helps to reduce maintenance costs by protecting equipment from oil mist.

This quality unit not only traps and removes the oil mist, but also the smoke associated with cutting tools and grinders.

ke a magnet. These particles then drip back down to be recaptured or drained away. The dirty collector plates can be simply washed clean, eliminating costly filter replacements.

The Mini M.E. also eliminates the need for extensive duct work because it can be easily mounted on the machine, platform or ceiling. This also helps to free up floor space. The Mini M.E. can help save on energy costs by being wired directly to the machine tool control, operating only when the machine tool does. It also helps to reduce maintenance costs by protecting equipment from oil mist.

This quality unit not only traps and removes the oil mist, but also the smoke associated with cutting tools and grinders.

ce. The Mini M.E. can help save on energy costs by being wired directly to the machine tool control, operating only when the machine tool does. It also helps to reduce maintenance costs by protecting equipment from oil mist.

This quality unit not only traps and removes the oil mist, but also the smoke associated with cutting tools and grinders. The Mini M.E. cleans and recirculates indoor air with up to 95% efficiency rate on 0.3 micron particles. It also offers a great advantage in that it can be seamlessly integrated into pre-existing machine tool systems.

Trion is one of the most trusted names in air purification systems. Trion has produced high quality products for industrial, commercial, military and residential markets since 1947.