Tags |
|
|
Links |
|
|
Add You - How To Properly Remanufacture Your Lexmark 10N0026 Inkjet Printer Cartridges In Just 11 Easy Steps
Long Island has been a growing economic power for the last 3 decades. Companies that only saw New York City as a viable option for their business years ago, now see Long Island as a strong place to rent office space.Class "A" and "B" office spaceClass "A" office buildings offer the newest offices on Long Island. These buildings usually offer newer construction, corporate location, Information desks, Exercise rooms and cafeterias. They are the top office leases that are available. They are more expensive per foot than Class "B" space in the same area. Small or start up companies with limited capital, may want to avoid this type of space initially. The rent and taxes can be rough for a small business. Larger companies will see this as the only option. A company like Merrill Lynch or Washington Mutual will normally not inhabit anything less than Class A space.Some areas where you will find the most attractive Class A and class B office buildings:Garden Cit
If by chance the cap is required during the print test, you can secure the cap temporarily with a strong rubber band.
Step #8 – Weld Replacement Top:
•For cartridges that pass the print test phase must receive a replacement top.
As a reminder, ultrasonic welding is by far the fastest and cleanest method of attaching the cartridge tops, although a suitable adhesive may also be implemented.
A typical ultrasonic weld will only take a fraction of a second. This is not at all, time consuming.
Step #9 – Seal Nozzles:
•Just like the OEM (original equipment manufacturer) cartridge, the nozzles on the remanufactured inkjet cartridge should be sealed with blue tape.
This indeed can be one of the more difficult phases throughout the process. A thoroughly clean and dry nozzle plate makes the best sealing environment.
A mechanical pressing device that allows two presses brings consistency to the process, and the application of just enough heat to soften the applied tape will allow it to conform more perfectly during the second press.
When applying the blue tape, there may be a remove label included.
Step #10 – Clean – Label – Package – Date Code:
•The appearance of the cartridges should be given your undivided attention. This is important if you plan on reselling this product.
Be careful and cau
As important as the design and the way a websites work, another important issue can actually have negative results on not only your customers but your business. Site speed is a very important topic and should not be overlooked when having your website designed or re-designed. It can actually directly hurt your sales and cut into your profits as people do not have the time to sit there and wait for your website to load. This is something that good sites take advantage of only having very small load times and bad sites seem to ignore(because they seem to overlook download time without even thinking of site optimization).If it takes forever to get into your website as well as click through it(meaning it takes forever to load each page) then people are going to leave your site. Remember this. Just think if it takes you 20 minutes to walk to a grocery store or 5 minutes to walk to the local market(where you can get everything you need) why would you walk that extra 15 minutes?
Here are you Step-by-Step “How-to-Remanufacture Your Lexmark 10N0026” Instructions:
Let’s get straight to the point, no beating around the bush during this lecture.
First, you will need the necessary Tools & Supplies Required:
Tools & Supplies Required:
•Electrical Circuit Tester (tool)
•Flush Cleaning Machine (tool)
•Bin for soaking (tool)
•Nozzle-Sealing machine
•Centrifuge (tool)
•Printer Tester or OEM Printer (tool)
•Ultrasonic Welder or Hot Glue Gun (tool)
•Top Removal Tool or Machine (tool)
•Vacuum-Filling Machine (tool)
•Towels (supply)
•Purified Water (supply)
•Labels and Packaging Material (supply)
Here you will also be provided with the OEM (original equipment manufacturer) information:
Lexmark 10N0026:
•Part Number: 10N0026
•OEM Milliliter Load: 19 ml
•Yield @ 5% coverage: 410 pages / min:14
•Resolution: 2400x1200dpi (dots per inch)
Below are the 11 steps to know how to remanufacture your Lexmark inkjet 10N0026 ink cartridges.
Step #1 – Perform Visual Inspection and Electrical Test:
•Immediately, when the cartridges are unpacked and compiled for processing, they should be promptly inspected.
Analyzing the cartridge from all angles will disclose any obvious problems that would make it nearly impossible to process, such as flex circuit or print head damage.
Visual inspections can be quickly performed in the same time frame as the circuit test, which will eliminate cartridges with electrical failures.
Step #2 – Remove Top and Foam:
•In this step, the cartridge tops are removed in the fastest way possible while leaving a consistently even and smooth surface that will enable a brand new top to be welded onto the cartridges at a later time.
The original equipment manufacturer’s top is not reusable. Due to the fact that the top is engraved with the Lexmark logo, ink cartridges recyclers such as you would rather not have it there to reuse anyway.
Step #3 – Soak with Solution:
•Each 10N0026 cartridge is filled with Lexmark’s notorious pigmented ink. The ink formula is similar to the 12A1970 cartridges, yet does not seem to render the cartridge useless as quickly by drying to the point of no return.
Although, the ink happens to thicken similar to a shoe polish consistency soon enough to be a formidable obstacle to processing by customary means.
Now, with the tops removed, the cartridges are filled with approximately 20 ml each of soaking solution that is formulated to return the thickened ink to a minimal liquid state.
There should be at least a minimum of three hours of soaking time at room temperature, this is highly recommended.
It would also be a good idea to place some towels under the cartridges during this step which will help capillary actions from possibly taking place.
Step #4 – Clean and Rinse:
•As for any excess solution, I suggest you dispose of it (observing all applicable local waste disposal regulations), allowing the soaked cartridges to be placed in the inverted position onto the specially designed flushing apparatus.
The target of the flushing will be only the pre-firing chamber, which is the barrel shaped reservoir adjacent to the print head.
During this process, warmed purified water is directed through the filter screen at a safe pressure, forcing the re-liquefied ink through the nozzles.
The water stream provides a physical force to move a sufficient volume of water through the entire ink delivery system, accomplishing a thorough exchange of fluids converting ink to water and rinsing away any soaking solution in the process.
Step #5 – Replace Foam:
•Felted or permanently compressed, foam is inserted into the cleaned cartridge body. Felted foams are sometimes cut very closely to the actual size of the ink chamber, which eases insertion.
Lexmark will use non-felted foams for this cartridge and depending on the compression necessary to insert the foam to produce the desired finished compression. Non-felted foams are less expensive to produce, although they are much more difficult to consistently insert.
Compression ratios, choice of foam material and pore size all affect the flow of ink and ultimately the cartridges performance.
The felted foam chosen for this cartridge is a polyether material, which when filled with pigmented ink, is usually contains more stability then polyester materials.
Step #6 – Vacuum Fill and Stabilize Cartridge:
•The nozzles are then sealed with a blue tape or clip before vacuum filling, and the cartridges are submitted into a vacuum type environment.
Both the foams, print head are adjacent cavities that are evacuated to approximately 650 mmHg and the ink is the slowly released as near to the filter screen as close as possible.
When this volumetric fill has been completed, the chamber containing the cartridges is slowly returned to atmospheric pressure.
Each cartridges remains sealed at the nozzles for about one working day prior to the print test.
This time allows for additional stabilization to take place, providing you with more reliable print results.
Step #7 – Print Test:
•To perform a print test, it may include flooding the nozzles for cleansing purposes (100% prints) and the printing of various fonts and sizes of text.
Assorted grayscale blocks will help reveal the quality of the cartridge. Before the cartridge cap is welded, the print test must be completed.
If by chance the cap is required during the print test, you can secure the cap temporarily with a strong rubber band.
Step #8 – Weld Replacement Top:
•For cartridges that pass the print test phase must receive a replacement top.
As a reminder, ultrasonic welding is by far the fastest and cleanest method of attaching the cartridge tops, although a suitable adhesive may also be implemented.
A typical ultrasonic weld will only take a fraction of a second. This is not at all, time consuming.
Step #9 – Seal Nozzles:
•Just like the OEM (original equipment manufacturer) cartridge, the nozzles on the remanufactured inkjet cartridge should be sealed with blue tape.
This indeed can be one of the more difficult phases throughout the process. A thoroughly clean and dry nozzle plate makes the best sealing environment.
A mechanical pressing device that allows two presses brings consistency to the process, and the application of just enough heat to soften the applied tape will allow it to conform more perfectly during the second press.
When applying the blue tape, there may be a remove label included.
Step #10 – Clean – Label – Package – Date Code:
•The appearance of the cartridges should be given your undivided attention. This is important if you plan on reselling this product.
Be careful and caut
Cheapest secured loan – many lenders use this phrase in their advertisements. However, most of the offers are nothing more than a trap to lure the borrowers. The benefit the cheapest secured loan offers to the borrowers makes them blindly follow such advertisements and succumb to the temptation. The reality to which they wake up later, forces them to repent in leisure. To shop around and then choose the best offer – this basic lesson of getting a cheapest loan is learnt by such callous borrowers after paying a heavy price.The first step in getting a cheapest secured loan is to know what you want. Before anything you do, you must enumerate your borrowing requirements clearly. The amount you want to borrow, how long would you like the repayment period to be, what amount of monthly installment are you comfortable with, would you like the loan to be from an online lender or an established bank etc., write each one of these and more on a paper. The clearer you are in your object
Visual inspections can be quickly performed in the same time frame as the circuit test, which will eliminate cartridges with electrical failures.
Step #2 – Remove Top and Foam:
•In this step, the cartridge tops are removed in the fastest way possible while leaving a consistently even and smooth surface that will enable a brand new top to be welded onto the cartridges at a later time.
The original equipment manufacturer’s top is not reusable. Due to the fact that the top is engraved with the Lexmark logo, ink cartridges recyclers such as you would rather not have it there to reuse anyway.
Step #3 – Soak with Solution:
•Each 10N0026 cartridge is filled with Lexmark’s notorious pigmented ink. The ink formula is similar to the 12A1970 cartridges, yet does not seem to render the cartridge useless as quickly by drying to the point of no return.
Although, the ink happens to thicken similar to a shoe polish consistency soon enough to be a formidable obstacle to processing by customary means.
Now, with the tops removed, the cartridges are filled with approximately 20 ml each of soaking solution that is formulated to return the thickened ink to a minimal liquid state.
There should be at least a minimum of three hours of soaking time at room temperature, this is highly recommended.
It would also be a good idea to place some towels under the cartridges during this step which will help capillary actions from possibly taking place.
Step #4 – Clean and Rinse:
•As for any excess solution, I suggest you dispose of it (observing all applicable local waste disposal regulations), allowing the soaked cartridges to be placed in the inverted position onto the specially designed flushing apparatus.
The target of the flushing will be only the pre-firing chamber, which is the barrel shaped reservoir adjacent to the print head.
During this process, warmed purified water is directed through the filter screen at a safe pressure, forcing the re-liquefied ink through the nozzles.
The water stream provides a physical force to move a sufficient volume of water through the entire ink delivery system, accomplishing a thorough exchange of fluids converting ink to water and rinsing away any soaking solution in the process.
Step #5 – Replace Foam:
•Felted or permanently compressed, foam is inserted into the cleaned cartridge body. Felted foams are sometimes cut very closely to the actual size of the ink chamber, which eases insertion.
Lexmark will use non-felted foams for this cartridge and depending on the compression necessary to insert the foam to produce the desired finished compression. Non-felted foams are less expensive to produce, although they are much more difficult to consistently insert.
Compression ratios, choice of foam material and pore size all affect the flow of ink and ultimately the cartridges performance.
The felted foam chosen for this cartridge is a polyether material, which when filled with pigmented ink, is usually contains more stability then polyester materials.
Step #6 – Vacuum Fill and Stabilize Cartridge:
•The nozzles are then sealed with a blue tape or clip before vacuum filling, and the cartridges are submitted into a vacuum type environment.
Both the foams, print head are adjacent cavities that are evacuated to approximately 650 mmHg and the ink is the slowly released as near to the filter screen as close as possible.
When this volumetric fill has been completed, the chamber containing the cartridges is slowly returned to atmospheric pressure.
Each cartridges remains sealed at the nozzles for about one working day prior to the print test.
This time allows for additional stabilization to take place, providing you with more reliable print results.
Step #7 – Print Test:
•To perform a print test, it may include flooding the nozzles for cleansing purposes (100% prints) and the printing of various fonts and sizes of text.
Assorted grayscale blocks will help reveal the quality of the cartridge. Before the cartridge cap is welded, the print test must be completed.
If by chance the cap is required during the print test, you can secure the cap temporarily with a strong rubber band.
Step #8 – Weld Replacement Top:
•For cartridges that pass the print test phase must receive a replacement top.
As a reminder, ultrasonic welding is by far the fastest and cleanest method of attaching the cartridge tops, although a suitable adhesive may also be implemented.
A typical ultrasonic weld will only take a fraction of a second. This is not at all, time consuming.
Step #9 – Seal Nozzles:
•Just like the OEM (original equipment manufacturer) cartridge, the nozzles on the remanufactured inkjet cartridge should be sealed with blue tape.
This indeed can be one of the more difficult phases throughout the process. A thoroughly clean and dry nozzle plate makes the best sealing environment.
A mechanical pressing device that allows two presses brings consistency to the process, and the application of just enough heat to soften the applied tape will allow it to conform more perfectly during the second press.
When applying the blue tape, there may be a remove label included.
Step #10 – Clean – Label – Package – Date Code:
•The appearance of the cartridges should be given your undivided attention. This is important if you plan on reselling this product.
Be careful and cau
Autodesk buys Alias, a privately held developer of three-dimensional graphics technology, for $182 million in cash. Toronto-based Alias posted revenues of $83 million for the year ended June 30. Its customers include car makers BMW and General Motors Corp. and game maker Nintendo. Alias is a leader in the Industrial Design Tool category, and also has offerings in 3D Animation / Entertainment Graphics Tools, where it competes with Autodesk.Just about a year back, Alias was spun out of SGI by Accel-KKR in a deal valued at $57.5 Million (1X revenue; 7X net income).Good deal for Accel-KKR, for sure. Whom else is it a good deal for?Well, it is a very bad deal for Adobe, whose 3D strategy is virtually non-existent. As THE leader in Content Production Tools, it is rather strange that Adobe sat in the sidelines, watching Autodesk walk away with Alias, strengthening its already strong 3D story.There is only one industrial strength 3D technology (with an independ
It would also be a good idea to place some towels under the cartridges during this step which will help capillary actions from possibly taking place.
Step #4 – Clean and Rinse:
•As for any excess solution, I suggest you dispose of it (observing all applicable local waste disposal regulations), allowing the soaked cartridges to be placed in the inverted position onto the specially designed flushing apparatus.
The target of the flushing will be only the pre-firing chamber, which is the barrel shaped reservoir adjacent to the print head.
During this process, warmed purified water is directed through the filter screen at a safe pressure, forcing the re-liquefied ink through the nozzles.
The water stream provides a physical force to move a sufficient volume of water through the entire ink delivery system, accomplishing a thorough exchange of fluids converting ink to water and rinsing away any soaking solution in the process.
Step #5 – Replace Foam:
•Felted or permanently compressed, foam is inserted into the cleaned cartridge body. Felted foams are sometimes cut very closely to the actual size of the ink chamber, which eases insertion.
Lexmark will use non-felted foams for this cartridge and depending on the compression necessary to insert the foam to produce the desired finished compression. Non-felted foams are less expensive to produce, although they are much more difficult to consistently insert.
Compression ratios, choice of foam material and pore size all affect the flow of ink and ultimately the cartridges performance.
The felted foam chosen for this cartridge is a polyether material, which when filled with pigmented ink, is usually contains more stability then polyester materials.
Step #6 – Vacuum Fill and Stabilize Cartridge:
•The nozzles are then sealed with a blue tape or clip before vacuum filling, and the cartridges are submitted into a vacuum type environment.
Both the foams, print head are adjacent cavities that are evacuated to approximately 650 mmHg and the ink is the slowly released as near to the filter screen as close as possible.
When this volumetric fill has been completed, the chamber containing the cartridges is slowly returned to atmospheric pressure.
Each cartridges remains sealed at the nozzles for about one working day prior to the print test.
This time allows for additional stabilization to take place, providing you with more reliable print results.
Step #7 – Print Test:
•To perform a print test, it may include flooding the nozzles for cleansing purposes (100% prints) and the printing of various fonts and sizes of text.
Assorted grayscale blocks will help reveal the quality of the cartridge. Before the cartridge cap is welded, the print test must be completed.
If by chance the cap is required during the print test, you can secure the cap temporarily with a strong rubber band.
Step #8 – Weld Replacement Top:
•For cartridges that pass the print test phase must receive a replacement top.
As a reminder, ultrasonic welding is by far the fastest and cleanest method of attaching the cartridge tops, although a suitable adhesive may also be implemented.
A typical ultrasonic weld will only take a fraction of a second. This is not at all, time consuming.
Step #9 – Seal Nozzles:
•Just like the OEM (original equipment manufacturer) cartridge, the nozzles on the remanufactured inkjet cartridge should be sealed with blue tape.
This indeed can be one of the more difficult phases throughout the process. A thoroughly clean and dry nozzle plate makes the best sealing environment.
A mechanical pressing device that allows two presses brings consistency to the process, and the application of just enough heat to soften the applied tape will allow it to conform more perfectly during the second press.
When applying the blue tape, there may be a remove label included.
Step #10 – Clean – Label – Package – Date Code:
•The appearance of the cartridges should be given your undivided attention. This is important if you plan on reselling this product.
Be careful and cau
For sometime now, Google Adsense has dominated forums, discussions and newsletters all over the Internet. Already, there are tales of fabulous riches to be made and millions made by those who are just working from home. It seems that Google Adsense has already dominated the internet marketing business and is now considered the easiest way to make money online.The key to success with Adsense is the placement of advertiser’s ads on pages that are receiving high traffic for high demand keywords. The higher the cost-per-click to the advertiser, the more you will receive per click from your site. Obviously, it does not pay to target low cost-per-click keywords and place them on pages that do not receive hits.With all the people getting online and clicking away everyday, it is no wonder Google Adsense has become an almost instant hit.For some who are new to this market, it might be shocking to learn that their homepage is buried somewhere in a sea of little ads pro
Compression ratios, choice of foam material and pore size all affect the flow of ink and ultimately the cartridges performance.
The felted foam chosen for this cartridge is a polyether material, which when filled with pigmented ink, is usually contains more stability then polyester materials.
Step #6 – Vacuum Fill and Stabilize Cartridge:
•The nozzles are then sealed with a blue tape or clip before vacuum filling, and the cartridges are submitted into a vacuum type environment.
Both the foams, print head are adjacent cavities that are evacuated to approximately 650 mmHg and the ink is the slowly released as near to the filter screen as close as possible.
When this volumetric fill has been completed, the chamber containing the cartridges is slowly returned to atmospheric pressure.
Each cartridges remains sealed at the nozzles for about one working day prior to the print test.
This time allows for additional stabilization to take place, providing you with more reliable print results.
Step #7 – Print Test:
•To perform a print test, it may include flooding the nozzles for cleansing purposes (100% prints) and the printing of various fonts and sizes of text.
Assorted grayscale blocks will help reveal the quality of the cartridge. Before the cartridge cap is welded, the print test must be completed.
If by chance the cap is required during the print test, you can secure the cap temporarily with a strong rubber band.
Step #8 – Weld Replacement Top:
•For cartridges that pass the print test phase must receive a replacement top.
As a reminder, ultrasonic welding is by far the fastest and cleanest method of attaching the cartridge tops, although a suitable adhesive may also be implemented.
A typical ultrasonic weld will only take a fraction of a second. This is not at all, time consuming.
Step #9 – Seal Nozzles:
•Just like the OEM (original equipment manufacturer) cartridge, the nozzles on the remanufactured inkjet cartridge should be sealed with blue tape.
This indeed can be one of the more difficult phases throughout the process. A thoroughly clean and dry nozzle plate makes the best sealing environment.
A mechanical pressing device that allows two presses brings consistency to the process, and the application of just enough heat to soften the applied tape will allow it to conform more perfectly during the second press.
When applying the blue tape, there may be a remove label included.
Step #10 – Clean – Label – Package – Date Code:
•The appearance of the cartridges should be given your undivided attention. This is important if you plan on reselling this product.
Be careful and cau
DECIDING HOW MANY SHOWS TO DO PER YEARDepending on whether you are a manufacturer or a wholesaler dependent on a manufacturer, the number of shows that you can do are limited to the amount of product that can be realistically produced per year.If you are depending on the Department of Trade to finance your shows, you will only be able to do 4 per year, and that is only while they have the money allocated for trade shows.If you do 4 shows per year, and are being funded by the DTI, you will have to return to South Africa after every show, and all goods and monies have to emanate from South Africa. They will not consider any claims that are paid for with foreign money, i.e. by agents on your behalf.PLANNING THE BOOTHIt is imperative that you take as little equipment with you, because when the show is done, you will either have to dispose of all your furniture/stuff, or place it in storage in the USA if you want to use it again.The DTI gives
If by chance the cap is required during the print test, you can secure the cap temporarily with a strong rubber band.
Step #8 – Weld Replacement Top:
•For cartridges that pass the print test phase must receive a replacement top.
As a reminder, ultrasonic welding is by far the fastest and cleanest method of attaching the cartridge tops, although a suitable adhesive may also be implemented.
A typical ultrasonic weld will only take a fraction of a second. This is not at all, time consuming.
Step #9 – Seal Nozzles:
•Just like the OEM (original equipment manufacturer) cartridge, the nozzles on the remanufactured inkjet cartridge should be sealed with blue tape.
This indeed can be one of the more difficult phases throughout the process. A thoroughly clean and dry nozzle plate makes the best sealing environment.
A mechanical pressing device that allows two presses brings consistency to the process, and the application of just enough heat to soften the applied tape will allow it to conform more perfectly during the second press.
When applying the blue tape, there may be a remove label included.
Step #10 – Clean – Label – Package – Date Code:
•The appearance of the cartridges should be given your undivided attention. This is important if you plan on reselling this product.
Be careful and cautious because the final cleaning of the circuit and cartridge body and application of the replacement label along with date code are all part of the finishing process.
Carefully research the matching of inks and foams when choosing replacement foams. This is expected in order to ensure the greatest of quality measures.
This should result in an ink cartridge being stable for a year or more from the date of the manufacturer.
Congratulations, you have successfully completed the process on how to remanufacture your own Lexmark 10N0026 inkjet cartridge.
Good luck and complete each cartridge as if it were your last. This information is provided to you at no expense to both educate and improve your knowledge in the technical area within the remanufacturing industry.
HTTP = HTML link (for blogs, profiles,phorums):
<a href="http://www.addyou.info/article/174996/addyou-How-To-Properly-Remanufacture-Your-Lexmark-10N0026-Inkjet-Printer-Cartridges-In-Just-11-Easy-Steps.html">How To Properly Remanufacture Your Lexmark 10N0026 Inkjet Printer Cartridges In Just 11 Easy Steps</a>
BB link (for phorums):
[url=http://www.addyou.info/article/174996/addyou-How-To-Properly-Remanufacture-Your-Lexmark-10N0026-Inkjet-Printer-Cartridges-In-Just-11-Easy-Steps.html]How To Properly Remanufacture Your Lexmark 10N0026 Inkjet Printer Cartridges In Just 11 Easy Steps[/url]
Related Articles:
Digital Signage Concepts and Terms
Make Money Online Working From Home
Bookmark it:
|